5 HUSKYTOOLS.COM
Please contact 1-888-43-HUSKY for further assistance.
Installation
1
Cleaning the air hose
□ A 1/4” air hose is required, with a maximum length of 25 ft.
□ Clean the air hose of accumulated dust and moisture
before connecting it to the air supply.
NOTE: If a longer air hose is required, connect a 3/8" air
hose to the 1/4" air hose to ensure the spray gun has the
necessary air supply.
2
Connecting to the air supply
□ Always use clean dry air. Excessive moisture and dirt will
greatly reduce the life of any air motor. We recommend the
installation of an in-line lter-regulator as close to the tool
as possible.
□ Ensure all hoses and ttings are the correct size and
secured tightly.
WARNING: Lubricators should not be used with spray
guns. The use of an inline lubricator will damage the paint
nish.
Recommended Air Line Set-Up
Part Description
A Spray Gun
B Regulator
C Quick Plug
D Quick Coupler
E Air Hose
F In-line Filter
G Air Compressor
To Next Page
Loading...
