Husqvarna 128PS - Safety Devices on the Product

accident does occur. Let your dealer help you
select the right equipment.
• Use a protective helmet where there is a risk of
falling objects.
• Use approved hearing protection that provides
adequate noise reduction. Long-term exposure
to noise can result in permanent hearing
impairment.
• Use approved eye protection. If you use a visor,
you must also use approved protective goggles.
Approved protective goggles must comply with
the ANSI Z87.1 standard in the USA or EN 166
in EU countries.
• Use gloves when necessary, for example when
you attach, examine or clean the cutting
equipment.
• Use sturdy non-slip boots.
• Use clothing made of a strong fabric. Always
use heavy, long pants and long sleeves. Do
not use loose clothing that can catch on twigs
and branches. Do not wear jewelry, short pants,
sandals or go with bare feet. Put your hair up
safely above shoulder level.
• Keep first aid equipment close at hand.
Safety devices on the product
WARNING: Read the warning
instructions that follow before you use
the product.
• Do not use a product with defective safety
devices.
• Do a check of the safety devices regularly. Refer
to
Maintenance schedule on page 15 .
• If the safety devices are defective, speak to your
Husqvarna servicing dealer.
To do a check of the throttle trigger lockout
1. Make sure that the throttle trigger lockout (A) and
throttle trigger (B) move freely and that the return
spring works correctly.
A
B
2. Push down the throttle trigger lockout and make
sure that it goes back to its initial position when
you release it.
1780 - 001 - 08.02.2022
7