Need help?Do you have a question about the Husqvarna 325R X-SERIES and is the answer not in the manual?
General| Engine Type | 2-stroke |
|---|---|
| Power Output | 0.8 kW |
| Cutting Width | 45 cm |
| Line Diameter | 2.4 mm |
| Shaft Type | Straight |
| Starter System | Smart Start |
| Sound Power Level | 107 dB(A) |
| Fuel Tank Volume | 0.5 L |
Identifies and labels all key components of the clearing saw as shown in the diagram.
Step-by-step instructions for fitting the handlebar onto the machine for models 323R and 325Rx/325RDx.
Information on the correct type of fuel, oil mixture, and storage guidelines for the machine.
Precautions and steps for safely refuelling the machine, emphasizing fire prevention.
Essential checks to perform on the machine before attempting to start the engine.
Procedure for safely starting and stopping the engine, including cold and warm engine procedures.
Details on carburettor function, basic settings, and fine adjustment procedures for optimal performance.
Procedure for fine-tuning the carburettor settings after the engine run-in period for optimal performance.
Tasks to perform daily, including checking controls, stop switch, and cutter rotation at idle.
Tasks to perform weekly, including cleaning filters, checking starter, and spark plug.
Tasks to perform monthly, including fuel tank, clutch, electrical connections, and muffler mesh.
Provides detailed specifications for engine, ignition, fuel system, weight, sound, and vibration levels.
Outlines the owner's rights and responsibilities regarding the emission control system warranty.
Specifies the duration and terms of the warranty coverage for emission-related parts.
Details the owner's duty to perform maintenance and use approved parts to maintain warranty validity.
Defines when the warranty period begins for the small nonroad engine.
States the warranty period for the engine, covering initial owner and subsequent purchasers.
Specifies that repair or replacement of warranted parts will be performed at no charge by authorized dealers.
Details the warranty duration for parts, distinguishing between scheduled and non-scheduled replacements.
Clarifies that diagnostic labor leading to a defective warranted part is not charged to the owner.
Husqvarna Forest & Garden may be liable for damages to other components caused by a warranted part failure.
Lists conditions like abuse, neglect, or improper maintenance that are excluded from warranty coverage.
Warns that using non-approved parts can void the warranty and is not covered.
Provides instructions on contacting dealers or service centers for warranty-related questions.
Directs users to authorized Husqvarna Forest & Garden servicing dealers for all warranty services and repairs.
States that approved replacement parts for emission-related maintenance are provided free under warranty.
Lists specific parts covered under the emission control warranty, such as carburetor and ignition system.
Confirms the owner's responsibility for performing all required maintenance as defined in the operator's manual.
To Next Page