8 – English
2.8 General instructions
The workshop where the pole saw is to be repaired
must be equipped with safety devices in accor-
dance with local regulations.
No-one may repair the pole saw unless they have
read and understood the content of this Workshop
Manual first.
This Workshop Manual contains the following
warning boxes in relevant places.
WARNING!
The warning box warns of the risk
of personal injury if the instruc-
tions are not followed.
NOTE!
This box warns of material damage if
the instructions are not followed.
2.9 Special instructions
Remove the battery from the pole saw before dis-
mantling and troubleshooting.
The battery must not be connected while the pole
saw is dismantled.
Never unscrew the battery. Replace a damaged
battery.
When using compressed air, do not direct the air
jet toward your body. Air can penetrate into the
blood circulation, which means mortal danger.
Use ear protection during testing.
2.10 Limitations
This Workshop Manual is intended mainly for the
repair of pole saw 536LiP4 / LiPT5, LiPX.
Introduction and safety regulations
To Next Page
Loading...
