EasyManua.ls Logo

Husqvarna 580BTS Mark II User Manual

Husqvarna 580BTS Mark II
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
580BTS Mark II
EN Operator's manual 2-16
ZH 操作手册 17-29
Question and Answer IconNeed help?

Do you have a question about the Husqvarna 580BTS Mark II and is the answer not in the manual?

Husqvarna 580BTS Mark II Specifications

General IconGeneral
Engine displacement75.6 cm³
Power output3.5 kW / 4.7 hp
Air speed92 m/s
Weight11.8 kg
Sound power level, guaranteed (LWA)112 dB(A)
Fuel tank volume1.1 liters
Engine type2-stroke

Summary

Introduction to the Husqvarna Blower

Product Description

Overview of the Husqvarna 580BTS Mark II backpack blower.

Intended Use

Specifies the recommended applications for the blower.

Product Overview Diagram

Diagram of the blower with numbered components identified.

Product Symbols and Liability

Symbols on the Product

Explanation of warning symbols and safety icons found on the product.

Product Liability Statement

Company's disclaimer regarding damages caused by improper product use or repair.

Safety Guidelines and Precautions

Safety Definitions and Symbols

Explanation of WARNING, CAUTION, and NOTE terminology in the manual.

General Safety Instructions

Essential guidelines for safe product operation and maintenance.

Operational Safety Precautions

Specific safety precautions to follow before and during product operation.

Personal Protective Equipment

Details on essential protective gear required for safe operation.

Product Safety Devices and Checks

Information on product safety features and their checks.

Muffler Inspection and Maintenance

Procedure for inspecting the muffler for damage and proper attachment.

Vibration Damping System

Description and inspection of the product's vibration damping system.

Fuel Safety Guidelines

Crucial safety guidelines related to handling and using fuel.

Air Filter Safety and Maintenance

Importance of using and maintaining the air filter correctly.

Stop Switch Operation Safety

Instructions for using the stop switch to safely shut down the engine.

Harness Safety and Adjustment

Guidelines for properly wearing and adjusting the product's harness.

Maintenance Safety Instructions

Warnings and precautions for performing maintenance tasks.

Assembly and Harness Adjustment

Assembling the Tube and Handle

Step-by-step guide to attach the blower tube and handle.

Adjusting the Harness

Instructions on how to properly fit and adjust the product's harness.

Product Operation Guide

Fuel Requirements and Mixing

Information on the correct type of fuel, oil, and mixing ratios.

Two-Stroke Oil Selection

Details on recommended and compatible two-stroke oils.

Mixing Fuel Correctly

Steps for correctly mixing gasoline and two-stroke oil.

Adding Fuel to the Tank

Procedures for safely adding fuel to the product's tank.

Pre-Operation Checks

Pre-operation checks and safety advice.

Throttle Control Operation

How to use the throttle control for different speeds.

Starting the Engine

Step-by-step guide to start the blower engine.

Maintenance Procedures and Schedule

Maintenance Schedule

Routine maintenance tasks with daily, weekly, and monthly checks.

Spark Plug Check and Cleaning

Procedure for inspecting and cleaning the spark plug.

Muffler Maintenance and Spark Arrester

Steps for checking and maintaining the muffler and spark arrester screen.

Cooling System Cleaning

Instructions for cleaning the engine's cooling fins and air intake screen.

Air Intake Screen Inspection

How to check the air intake screen for blockages and damage.

Air Filter Cleaning and Replacement

Guide to cleaning and replacing the air filter for optimal performance.

Harness Replacement Procedure

Instructions for safely replacing a damaged harness.

Transportation and Storage Guidelines

Technical Specifications and Data

Warranty Information and Terms

Limited Warranty Details

Details on warranty coverage, period, and exclusions.

Related product manuals