Husqvarna Aspire T28-P4A User Manual (English)

Questions and Answers:

G
Gregory ConwayAug 15, 2025
What to do if the red error LED flashes on my Husqvarna Aspire T28-P4A Trimmer?
- G
  Gregory WrightAug 15, 2025
  If the red error LED flashes on your Husqvarna Trimmer, it could be due to several reasons: * **Overload:** The cutting attachment may not be moving freely. Try releasing the cutting attachment. * **Temperature deviation:** The product may be too hot. Allow it to cool down. * **Simultaneous button press:** You may be pushing the power trigger and the start button at the same time. Release the power trigger and then push the start button.
M
Mark BennettAug 18, 2025
How to fix a Husqvarna Aspire T28-P4A when the green start LED flashes?
- J
  Jason SuttonAug 18, 2025
  If the green start LED flashes on your Husqvarna Trimmer, it indicates low battery voltage. Charge the battery to resolve this issue.
M
Mrs. Erica Washington PhDAug 21, 2025
Why are the green and red LEDs off on my Husqvarna Aspire T28-P4A battery charger?
- C
  Christopher ChapmanAug 21, 2025
  If both the green and red LEDs are off on your Husqvarna Trimmer's battery charger, check the following: * Ensure the battery charger is correctly connected to the mains outlet. * Verify that the mains outlet is working correctly by connecting the battery charger to the voltage and frequency specified on the rating plate. * The battery charger cable could be defective, in that case you should speak to an approved service agent.
G
Gary GloverAug 25, 2025
What does it mean when the green and red LEDs flash alternately on my Husqvarna Trimmer?
- B
  briancookAug 26, 2025
  When the green and red LEDs flash alternately on your Husqvarna Trimmer, it could mean: * The battery is empty. Charge the battery. * The battery is damaged. In this case, speak to your service dealer.
C
Christina LeeAug 28, 2025
What to do if my Husqvarna Aspire T28-P4A Trimmer has other errors?
- G
  garciajosephAug 28, 2025
  If your Husqvarna Trimmer is experiencing errors not covered, turn the product off, remove the battery, and speak to an approved service agent.
C
Carly MoraAug 31, 2025
Why is the green LED on and the red LED flashing on my Husqvarna Aspire T28-P4A?
- M
  Matthew RiveraAug 31, 2025
  If the green LED is on and the red LED is flashing on your Husqvarna Trimmer, consider these potential causes: * The battery is not correctly installed in the battery charger. Remove the battery and install it again. * The battery connectors are dirty. Clean the battery connectors. * The ambient temperature is too high or too low. Use the battery charger in temperatures between 0 °C – +35 °C. * The battery is defective. Replace the battery.
S
Sarah PetersonSep 3, 2025
What to do if the green LED and the red LED are off on my Husqvarna Aspire T28-P4A?
- Z
  Zachary SmithSep 4, 2025
  If both the green and red LEDs are off on your Husqvarna Trimmer, check the following: * Ensure the battery charger is correctly connected to the mains outlet. If not, connect it properly. * Verify the mains outlet is functional. Connect the battery charger to a mains outlet that matches the voltage and frequency specified on the rating plate. * The battery charger cable may be defective. Speak to an approved service agent.
S
Sandra ThomasSep 7, 2025
Why are the green and red LEDs flashing alternately on my Husqvarna Aspire T28-P4A?
- W
  Wendy SmithSep 7, 2025
  If the green and red LEDs are flashing alternately on your Husqvarna Trimmer, it could mean: * The battery is empty. Charge the battery. * The battery is damaged. Speak to your service dealer.
S
sara92Sep 12, 2025
What to do for other errors with my Husqvarna Trimmer?
- S
  Shelley BellSep 12, 2025
  If other errors occur with your Husqvarna Trimmer, make sure that the product is off, remove the battery and speak to an approved service agent.