6
32
Technical data
Engine LC48 Be LB48 e LC53 Be
Engine manufacturer Briggs & Briggs & Briggs &
Stratton Stratton Stratton
Cylinder displacement cm
3
161 161 161
Speed, r/min 2,900 2,900 2,900
Nominal engine output, kW (see note 1) 2.7 2.7 2.7
Ignition system
Spark plug Champion Champion Champion
QC12YC QC12YC QC12YC
Electrode gap, mm 0.5 0.5 0.5
Fuel and lubrication system
Fuel tank capacity, litre 1.6 1.6 1.6
Oil tank capacity, litre 0.6 0.6 0.6
Engine oil SAE 30 SAE 30 SAE 30
Weight
Lawn mower with empty tanks, kg 44 38 45
Noise emissions
(see note 2)
Noise pressure level, measured in dB(A) 93 90 97
Noise pressure level, guaranteed L
WA
dB(A) 95 92 98
Noise level
(see note 3)
Noise pressure level at the operator’s ear, dB(A) 80 76 82
Vibration levels
(see note 4)
Handle m/s
2
5.5 5.5 4.9
Mowing
Cutting system 3 in 1 2 in 1 3 in 1
Cutting height, mm 25 - 70 25 - 70 25 - 70
Cutting width, mm 480 480 530
Blade Fixed Fixed Fixed
Drive
Speed, km/h 5.4 5.4 5.4
Starting
Electric starter – – –
Note 1: The power rating of the engine indicated is the average net power output (at specifi ed rpm) of a typical production engine for the
engine model measured according to SAE standard J1349/ISO1585. Mass produced engines may differ from this value. Actual power
output for the engine installed in the fi nal product will depend on the operating speed, environmental conditions and other factors.
Note 2: Noise emissions in the environment measured as sound power (L
WA
) in compliance with EC directive 2000/14/EC.
Note 3: Reported data for noise pressure level has a typical statistical dispersion (standard deviation) of 1.2 dB(A).
Note 4: Reported data for vibration level has a typical statistical dispersion (standard deviation) of 0.2 m/s2.
To Next Page
Loading...
