English-67
Conformity Certifi cates For Model Listed Below:
Model 968999310/LZ25C Zero Turn Rider (Serial Numbers 054600001 and after)
With Deck Model 968999343 TRD52 (Serial Numbers: 054600001 and after)
Deck Model 968999344 TRD61 (Serial Numbers: 054600001 and after)
Deck Model 968999348 CD52
Deck Model 968999349 CD61
USA requirements
Labels are placed on the engine and/or in the engine compartment stating that the machine will fulfi ll the
requirements. This is also applicable to special requirements for any of the states, (California emission
rules etc.). Do not remove any of these labels. Certifi cates can also be supplied with the machine at
delivery or written in the Engine manual. Take care of them as they are valuable documents.
EU declaration of conformity (Only applicable to European versions)
See the Declaration of Conformity Certifi cate for additional information.
Husqvarna AB, Beatrice NE USA declares under sole responsibility that the machine types stated on
page 1 of this manual, from 2005's serial numbers and onwards (the year is clearly stated in plain text
on the rating plate with subsequent serial number), complies with the requirements of the COUNCIL'S
DIRECTIVES:
- of May 17, 2006 "relating to machinery" 2006/42/EC, annex IIA.
- of December 15, 2004 "relating to electromagnetic compatibility" 2004/108/EC and applicable
supplements.
- of May 8, 2000 "relating to the emission of noise to surroundings" 2000/14/EC.
The following harmonised standards have been applied: EN292-2, EN836.
Business Name and Address:
Husqvarna Turf Care
401 North Commerce
Beatrice, NE 68310 USA
Notifi ed Body:
SNCH, 11 Route de Luxembourg, L-5230 Sandweiler, has issued reports regarding the assessment
of conformity according annex VI of the COUNCIL'S DIRECTIVE of May 8, 2000 "relating to the noise
emissions in the environment" 2000/14EC.
CONFORMITY CERTIFICATES
To Next Page
Loading...
