Need help?Do you have a question about the Husqvarna LZ5227TXPKOA, LZ6123LTKOA, LZ6127TKOA, LZ6130TXPKOA, LZ7230TXPKOA and is the answer not in the manual?
General| Cutting Width | 52 in (LZ5227TXPKOA), 61 in (LZ6123LTKOA, LZ6127TKOA, LZ6130TXPKOA), 72 in (LZ7230TXPKOA) |
|---|---|
| Fuel Type | Gasoline |
| Transmission Type | Hydrostatic |
| Cutting Height | 1.5 - 5 in |
| Engine Manufacturer | Kawasaki |
| Engine Power | 27 hp (LZ5227TXPKOA), 23 hp (LZ6123LTKOA), 30 hp (LZ6130TXPKOA, LZ7230TXPKOA) |
Defines directions, product updates, and intended use of the machine.
Rules for road use, transport, and towing the mower.
Details on service, parts, and locating manufacturing numbers.
Key safety rules for operating the machine safely.
Recommended protective gear for safe operation.
Precautions for mowing on slopes and child safety.
Identifies the location of various controls on the machine.
Operation of steering, speed, and parking brake controls.
Ignition switch, fuses, and blade switch operation.
Details on refueling, choke, throttle, and deck lifting.
Guidance for new users and basic movement.
Step-by-step procedure for starting the engine.
How to operate the machine while mowing.
Advice on mowing, stopping, and moving by hand.
Recommended maintenance intervals and tasks.
Battery care and ignition system checks.
Verifying safety interlocks and engine air intake.
Procedures for air filter, fuel filter, and tire pressure.
Chart detailing lubrication points and intervals.
Lubricating control cables and seat mechanisms.
Procedures for changing engine oil and filter.
Greasing wheel bearings, pulleys, and adjusters.
Diagnosing common engine problems.
Troubleshooting weak engine, overheating, and battery problems.
Resolving problems with machine movement and deck engagement.
Addressing uneven cutting and machine vibration.
Steps for preparing the machine for long-term storage.
Advice on ordering parts and annual service.
Visual representation of the machine's electrical system.
Details on engine type, power, and transmission systems.
Specifications for cutting width, weight, and overall size.
Information on compliance labels and requirements.
Procedures for initial delivery checks.
Tasks for 25, 50, 100, and 300-hour services.
Maintenance required yearly or at specific hour marks.
To Next Page