Problem Cause
The cutting result is unsatisfactory The blades are blunt. Refer to
To examine the blades on page 35
.
The grass is long or wet. Refer to
To get a good cutting result on page 23
.
The cutting deck is skew.
There is grass blockage in the cutting deck. Refer to
To clean the product on
page 26
.
The tire pressure is different on the right and left sides. Refer to
Tire pres-
sure on page 33
.
The pivoting wheels have different tire pressure on the right and left sides.
Refer to
Technical data on page 44
.
The product is operated at a too high speed. Refer to
To get a good cutting
result on page 23
.
The engine speed is too low. Refer to
Technical data on page 44
.
The drive belt slips.
Transportation, storage and disposal
Transportation
• The product is heavy and can cause crush injuries.
Be careful when you load it onto or off a vehicle or
trailer.
• Use an approved trailer for transportation of the
product.
• Make sure that you have knowledge of local road
traffic regulations before transportation of the
product in a trailer or on roads.
To safely attach the product on a trailer for
transport
Before you attach the product, you must read and
understand the safety chapter. Refer to
Safety on page
8
.
WARNING: The parking brake is not
sufficient to lock the product during
transport. Attach the product tightly to the
load area.
Equipment: 4 approved straps and 4 wedge shaped
wheel blocks.
1. Park the product in the center of the load area.
WARNING: For transport in transport
vehicles with a cover. Make sure to let
the product become cool before you put
the product under the cover.
740 - 004 - 41
To Next Page
Loading...
