Husqvarna YTH2348 240440 - Page 41

MOWER DECK
TRACTOR - - MODEL NUMBER YTH2348 (240440)
KEY PART
NO. NO.
1 532 44 00-48
6 532 19 72-48
7 532 19 91-02
8 532 19 30-03
11 532 18 00-54
12 532 40 48-51
13 532 18 72-91
14 532 18 72-81
15 532 11 04-85
16 819 13 13-12
17 872 11 05-05
18 872 14 05-05
19 532 19 42-08
20 532 17 43-78
21 873 68 05-00
22 532 17 44-93
24 532 10 53-04
25 532 17 81-02
26 532 11 04-52
27 532 18 17-07
29 532 13 14-91
30 532 17 39-84
31 532 18 76-90
32 532 15 35-32
33 532 40 02-34
39 532 19 73-80
43 532 19 60-65
46 532 13 77-29
47 532 19 72-42
48 532 19 73-79
KEY PART
DESCRIPTION NO. NO.
Deck Weldment Mower 49
Cover Mandrel LH 50
Cover Mandrel RH 52
Bolt/Washer Asm. 7/16-20 unf 54
Blade High Lift 97
Rod AntFSway 98
Shaft Asm. w/Lower Bearing 113
Housing, Mandrel 114
Bearing, Ball, Mandrel 116
Washer 13/23 x 13/16 x 1 2 Ga. 117
Bolt Carr. 5/16-18 x 5/8 120
Bolt RdHd 5/16-18 unc x 5/8 122
Pin Cotter 5/16 Bowtie Lock 185
Baffle Vortex 187
Nut, Crownlock 5/16-18 unc 188
Stripper Mandrel 189
Cap Sleeve 190
Spring, Torsion 194
Nut, Push 241
Deflector Shield 242
Rod, Hinge --
Screw, Thdroll Washer Head
Washer, Spacer Mower
Pulley, Mandrel
Nut, Fig. Top Lock
Pulley, Idler, 4.50 HUB
Arm, Idler
Screw, Thdroll. 1/4-20 x 5/8
Belt Drive Deck
Pulley Idler 4.50 Raw
DESCRIPTION
873 90 06-00 Nut, Lock Fig. 3/8-16 unc
817 49 06-36 Screw 3/8-16 x 1-1/4 unc
532 19 31-97 Pulley Idler
872 11 06-12 Bolt Carriage 3/8-16 x 1-1/2 Gr. 5
532 17 85-15 Washer Hardened
532 19 61-05 Spring Drive
872 11 05-08 Bolt Rdhd Sqnk 5/16-18 x 3/4
532 19 74-51 Rod Tension Relief
532 19 34-06 Bolt, Shoulder
532 17 48-73 Gauge Wheel
819 13 20-12 Washer 13/32 x 1-1/4 x 12 Ga.
532 18 75-57 Bushing Tension Relief
873 90 07-00 Nut Lock Flange 7/16-14 Gr. 5
532 19 51-61 Stud Fastener w/"D" AntFRotation
873 90 05-00 Nut Lock Hex Flange
532 19 51-85 Arm Susp. Mower Rear
532 19 65-39 Bolt Shoulder
874 49 07-36 Bolt Hex Washer Head
532 15 29-27 Screw TT 10-32.5.3/8
532 41 55-98 Port Washout
532 41 64-05 Coupling Quick Connect
532 18 72-92 Mandrel Assembly (Includes hous-
ing, shaft assembly, and bearing
only - pulley/nut/washer and blade
bolt/washers not included)
532 43 18-25 Replacement Mower, Complete
NOTE: All component dimensions given in U.S. inches
1 inch = 25.4 mm
41