Need help?Do you have a question about the Husqvarna Z4818BIA/968999250 and is the answer not in the manual?
General| Manufacturer | Husqvarna |
|---|---|
| Model | Z4818BIA/968999250 |
| Engine Brand | Briggs & Stratton |
| Engine Displacement | 724 cc |
| Fuel Type | Gasoline |
| Transmission Type | Hydrostatic |
| Speed Range | 0-6.5 mph |
| Cutting Width | 48 inches |
| Engine Model | Intek |
| Deck Material | Steel |
| Cutting Height Range | 1.5 - 4.5 in |
| Fuel Tank Capacity | 3.5 gallons |
| Turning Radius | Zero |
| Warranty | 3 year consumer warranty |
General information regarding the manual's terminology and product updates.
Guidelines for operating, driving, and transporting the machine.
Explanation of various symbols used in the manual and on the machine.
Essential safety rules for operating the mower safely.
Critical safety precautions for operating the mower on inclines.
Safety measures to protect children from hazards associated with the mower.
Identifies the location of all primary controls on the operator panel.
Operation of the parking brake and motion control levers for driving.
How to use the ignition, choke, and throttle for engine operation.
Engaging blades and adjusting cutting height.
How to move, turn, and zero-turn using the control levers.
Steps for preparing and starting the engine, including weak battery.
Operating the mower, including on hills and general mowing tips.
Overview of required maintenance tasks and their intervals.
Maintenance for the battery and ignition system, including spark plugs.
Procedures for air filters, fuel filters, and checking tire pressure.
Maintenance for drive belts and adjustment of the parking brake.
Adjusting the mower deck and replacing blades.
Chart detailing lubrication points and intervals for the machine.
Procedures for changing engine oil and oil filter.
Lubrication of cables, wheel mounts, bearings, and spindles.
Troubleshooting for engine not starting, running rough, or overheating.
Diagnosing problems with slow movement, uneven mowing, and deck engagement.
Troubleshooting excessive machine vibration and uneven mowing results.
Detailed instructions for preparing the mower for winter storage.
Electrical schematic showing the machine's wiring connections.
Key specifications for the engine, fuel type, and capacity.
Specifications for cutting width, blade length, and overall machine dimensions.
Correct torque values for various fasteners during assembly and maintenance.
Information regarding compliance with USA requirements and emissions.
Details on delivery, 25, 50, 100, 300-hour, and annual service tasks.
To Next Page
