47
3.4 (OTHER INSTALLATION OPTIONS)
3.4.1 Models with additional Data Logging interfaces
Pegasus2 includes data-logger functions. It is able to monitor various (optional)
transducers in addition to the (non-optional) pressure transducers. The interface for the
transducer must be ordered by selecting the appropriate model part-number; it is fitted
and enabled at the time of manufacture.
Refer to your sales representative for assistance if required.
For example, it may be required that an additional pressure transducer be fitted so that
the pressure within the upper chamber of the PRV can also be monitored and logged.
3.4.2 Control of two PRVs
Pegasus2 can be used to control certain installations that have two PRVs that are
connected in parallel.
(Refer to section 6 for details of additional equipment and settings).
3.4.3 Configuration for timed supply / cut-off of water supply
The Pegasus2 can be used with modified plumbing and configuration to provide a
regulated water pressure during certain times, but to also cut-off water supply during
certain parts of the day.
(Refer to section 5).
To Next Page
Loading...
