5
1 SYSTEM DOCUMENTATION AND SUPPORT OF PRODUCT
1.1 DOCUMENTATION AND TECHNICAL SUPPORT
Thank-you for choosing a HWM device. We trust it will provide you with many years of
service.
The Pegasus2 system is designed to control the outlet pressure from a clean-water
pressure reducing valve.
This user-guide provides details of each component of the Pegasus2 system and also
the system itself, (including alternative configuration options). It provides details of how
to install the product in a stand-alone mode and also (optional) integration with the
HWM DataGate system, providing on-line viewing of pressure measurements.
This user-guide covers the following models:
Model Number(s) Description
C163C/*/*/*/* Pegasus2 Controller unit
C163S/*/* Pegasus2 Solenoid unit
C163F/*/*/*/* A kit of individual units plus additional components to
make a complete Pegasus2 system.
Accessories Description
RCA7922L Hydroswitch with solenoid.
Note: The part-number structure is also shared with the “Sentinel 2” family of models.
Sentinel 2 has its own user-guide.
Note: The system periodically has new features and changes released, thus you may
observe slight changes in layout from those shown in this manual.
Additionally, views can vary depending on what user-role you have been
given and its permissions.
HWM provides support of the Pegasus2 system by means of our customer support
webpages: (Note: Customer registration is required to access).
https://www.hwmglobal.com/help-and-downloads/
Should you have any questions that are not covered by this manual or the system’s
online help, please contact the HWM Technical Support team on +44 (0) 1633 489479,
or email cservice@hwm-water.com
1.2 SAFETY
Before continuing, please read the “Safety Warnings and Approvals Information”
document supplied with the product.
WARNING: This equipment should be installed, adjusted, and serviced by qualified
water industry maintenance personnel familiar with the construction and operation of
the equipment and the hazards involved. Failure to observe this precaution could result
in damage to the water network.
1.3 OPERATING TEMPERATURE
Refer to the Datasheet or your sales representative for guidance on the storage and
operating temperature range of the device. Ensure the unit is within the operating
temperature range prior to installation or setup.
To Next Page
Loading...
