HWM Pegasus 2 - Page 7

7
Choosing which version to use
Prior to IDT being able to perform its functions, it has to ‘connect to’ the Pegasus2; this
simply means that the two end devices (Pegasus2 software and IDT software) are able
to communicate with each other over a working communications path.
IDT is available in three versions:
• IDT for PCs having a Windows-operating system.
• IDT for mobile devices (phones and tablets) having an Android operating system.
• IDT for mobile devices (phones and tablets) having an (Apple) iOS system.
The latter two are referred to as the ‘IDT app’, whereas the first is referred to as ‘IDT
(PC)’.
1.6.1 IDT (PC version)
Refer to the IDT (PC version) User-Guide (MAN-130-0017) for details of how to prepare
your PC for communicating with the Pegasus2. The user-guide also gives details of how
to use IDT for many settings, including those of the built-in logger; many of these are
required for use by the PRV controller.
The functions exclusive to the PRV control aspects of Pegasus2 are covered in this user-
guide.
1.6.2 IDT app (mobile device version)
Refer to the IDT app User-Guide (MAN-2000-0001) for details of how to prepare your
mobile device for communicating with the Pegasus2. The user-guide also gives details of
how to use IDT for many settings, including those of the built-in logger; many of these
are required for use by the PRV controller.
The functions exclusive to the PRV control aspects of Pegasus2 are covered in this user-
guide.