E. PAGING
17
E. PAGING
E.01 Zone Paging (Internal)
This feature allows an Extension to announce to a zone of Extensions through the Speaker on
the key telephones. There are eight Paging Zones in the system. The paging can be received
from Keyphones only.
→ , . Lift Handset.
. Press [#], [2].
→ Code(1-8) . Dial a one-digit Paging Zone Code.
NOTE: A busy Extension or the single line phone cannot receive the paging.
E.02 All Paging (Internal)
The feature is for paging all zones. The paging can be received from Keyphones only.
→ , . Lift Handset.
. Press [#], [1].
E.03 Zone Paging (External)
In GX system, Paging can be broadcast over external paging equipment to one of the eight
(maximum, depending on the system) External Zones.
→ , . Lift Handset.
. Press [#], [3].
→ Paging Code 1-8 . Dial a one-digit External Paging Code (1-8).
E.04 All Paging (External)
Paging can be broadcast over external paging equipment to all external zones.
→ , . Lift Handset.
. Press [#], [9].
To Next Page
Loading...