G. STATION PROGRAMMING
22
G. STATION PROGRAMMING
G.01 Call Forwarding
1. To forward All Calls:
All incoming calls (Incoming CO, Intercom and Transferred CO Lines) to your Extension
are automatically forwarded to any other Extension, Voice Mail or another outside number
such as a cell phone.
To Forward:
→[FWD] → Ext. No. . Press [PRG], [FWD] key.
. Dial [1] for Any Call,
[2] for Busy,
[3] for Busy/No Answer.
. Dial the ext. or hunt group number you want your calls
forwarded to.
When activated, your forward key will flash.
To Enable and Disable Call Forwarding:
. Simply Toggle [FWD] key.
. Call Forward LED will flash when active and be out when the
forwarding is inactive.
2. When Busy or No Answer:
If your Extension fails to answer after programmed time (10 to 100 seconds) or is busy, all
incoming calls to your Extension are automatically forwarded to any other Extension you
have programmed.
3. To forward an external number:
Program the external speed number:
→ , → → [DSS1~10] → Number →
Busy
. Press [PRG], [SPD], [DSS] key.
. Enter the outside telephone number and [SAVE].
To Forward:
→ [1]→ [DSS] . Press [PRG], [1], [DSS] key.
When activated, your forward key will flash.
6. To Enable and Disable Call Forwarding:
. Simply Toggle [FWD] key.
. Call Forward LED will flash when active and be out when the
forwarding is inactive.
To Next Page
Loading...