G. STATION PROGRAMMING
36
G.19 Lock / Unlock S.M.D.R output (For Console only)
This feature allows an Extension user to Lock / Unlock System's Station Message Detail
Recording (SMDR) output. If the S.M.D.R is locked then S.M.D.R. records will be stored
in the System's Memory and will not be sent out until the S.M.D.R. output is unlocked.
to lock / unlock
→ , , . Press [SPK] key.
. Dial [7],[7],[2].
NOTE: The G1-824 System's RAM can store max. 25 records.
G.20 Environment Monitor
This feature is allowed for an Extension to monitor another idle Extension which must
have Handsfree feature. This needs to be programmed beforehand. (See System
Programming mode 40.)
→ , , . Handset off hook or Press [SPK] key.
. Dial [7],[7],[4].
. Dial the Ext. number which you like to monitor.
→
To Next Page
Loading...