Need help?Do you have a question about the Hybrid edge and is the answer not in the manual?
Release the chassis travel lock and lift the stroller handle until it is fully erect.
Slide the front wheel onto the attachment pin and press to secure.
Slide rear wheel axle into housing until it clicks; remove by pressing release button.
Press down on the pedal to engage; press upper section to disengage.
Lift the folding handle and push down the secondary lock button to fold.
Lower seat into housings and press until it clicks.
Slot bumper bar into sockets; pull upwards to lock, press release buttons to remove.
Press marked area to loosen, press red button to release, pull strap to secure.
Undo press studs, thread straps through plastic and fabric for desired height.
Hold seat sides, locate release handles, and pull up.
Lower carrycot onto chassis and push firmly until it clicks and locks.
Insert adaptors into chassis housings until they click; depress buttons to remove.
Lower car seat onto adaptors and push until it clicks; pull handle to ensure security.
Details mono configurations for Edge and City modes. Height adaptors not for City axle.
Details warranty activation, policy, terms, and invalidation circumstances.
Provides guidance on regular checks, cleaning, lubrication, and fabric care.
To Next Page
General