EasyManua.ls Logo

Hydra Pools Aqua Genie User Manual

Hydra Pools Aqua Genie
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
The Automatic Way to Keep Pools Clean and Healthy
Page 1 of 8
I nstallation I nstructions
Rev. Level: F
Rev. Date: 10/09/2014
Document ID: HM038 Aqua Genie Installation
Rev. Level: G
Rev. Date: 11/20/2015
Document ID: HM038, Aqua Genie Installation
Question and Answer IconNeed help?

Do you have a question about the Hydra Pools Aqua Genie and is the answer not in the manual?

Hydra Pools Aqua Genie Specifications

General IconGeneral
BrandHydra Pools
ModelAqua Genie
CategoryLighting Equipment
LanguageEnglish

Summary

OPERATING & MAINTENANCE INSTRUCTIONS

AquaGenie SKIMMER/FEEDER

Dual-action unit for debris removal and automatic chlorine dispensing.

Operation

Details the water flow, counter-current action, and chlorine dispersal process.

AquaGenie Canister

Safe usage instructions for the chlorine canister and potential hazards.

Adjusting Chlorine Levels

Guide on setting the chlorinator from 1 (lowest) to 10 (highest).

Maintenance

Ensuring proper pool water level and flow for optimal performance.

INSTALLATION INSTRUCTIONS

Vacuuming

Steps for cleaning pool debris via the AquaGenie adapter plate.

LOCATIONS OF AQUAGENIE

Guidance on choosing the best placement, considering pool length and winds.

PIPE ADAPTERS

Instructions for connecting plumbing using specified sealants.

AQUAGENIE INSTALLATION ON FOAM WALL PANELS

Detailed steps for cutting and mounting on foam pool walls.

CUTTING NOTE

Recommendations for using specific saw blades for cleaner cuts.

STEEL PANEL POOLS WITH FACTORY CUT OUT

Method for installing unit in steel pools with pre-cut openings.

BLOCKING UP

How to support the unit using PVC pipe and concrete blocks.

PIPING

Advice on minimizing elbows for efficient water flow and double clamping.

OPTIONAL OVERFLOW

Instructions for installing an overflow pipe using a knockout.

INSTALLING FACE PLATE

Procedure for attaching the face plate and gasket to the unit.

ASSEMBLY OF ORIFICE PLATE

Steps for assembling the orifice plate with gasket and ensuring downward slope.

BACKFILL

Guidance on using sand or gravel for backfilling around the unit.

Winterizing

Installing Winter Cover Gasket

How to correctly install the gasket into the winter cover channel.

Assemble Winter Cover

Steps for assembling the winter cover with threaded rod and brace.

Installing Winter Cover

Procedure for attaching the assembled winter cover to the unit.

Related product manuals