Before installing the machine, make sure that your local electric network complies
with the voltage and frequency indicated on the tag on the rear panel. Otherwise, the
machine may be damaged incase of excessive current or voltage rise.
Never touch the machine with damp or wet hands or feet.
It is dangerous to change or try to modify the function of this machine in anyway.
Do not attempt to operate this unit if the power cord has been frayed or broken
Do not spill water or other liquids into or onto your unit.
During long periods of non-use, disconnect the unit’s main power.
Safety Rules When Installing
Place the machine on a stable and secure base. It should not be subjected to any jolts
or vibrations.
Never expose the unit to too high(>40ºC) nor too low temperature(<5ºC).
NEVER EXPOSE THE UNIT TO RAIN OR ANY OTHER HUMIDITY.
Do not expose the unit to direct sunshine or install the unit close to a source of
heat(central heating, radiator…); otherwise the screen may be damaged.
Do not cover or block the ventil at or behind the unit.
Safety Rules When in Use
Well clean areas to treat before treatment.
Never touch the machine with damp or wet hands or feet.
Never place the cavitation handpiece on the liver, kidney area.
Operate Interface Instruction
Treatment screen interface.
Make sure the power line has been installed correctly; make sure the hand pieces are
well connected with the equipment; ensure the circuit breaker (if any) at the back of
the machine is pressed to “on”. The working menu will appear automatically. Choose
the Language. Choose the right parameter to do the treatment according to the needs
of customer.
Turn on the machine and you can see the welcome screen and main selection
interface.
To Next Page
Loading...