1
、
click choose mode
，
adjust intensity
，
2
、
click set working time
，
facial treatment time about 20-30mins
，
3
、
Apply gel to the care area, and move the electrode probe from the inside to the
outside, from the bottom to the top. If there is less fat in the eyes and forehead, the
energy output intensity should be appropriately reduced.
4、click start operating ， stop operating，
5. When the set working time is up, the instrument will automatically pause.
6. Clean the skin with warm water,
7. Clean and disinfect the used radio frequency work head.
Precautions:
1. The beautician should wear knotted gloves when operating.
2. The electrode probe must be in full contact with the skin.
3. The electrode probe is close to the skin to move slowly, not stop moving.
To Next Page