6
• High pressure hoses may rupture if worn or damaged. Do not use HP solution hoses if hose covering
is cut, bulging, or otherwise damaged. Examine HP solution hoses daily and replace or repair hoses as
needed.
• Use defoamer to eliminate foam build-up during cleaning and prevent foam/moisture from entering
vacuums.
Olympus Features
1 Waste Tank 12 Solution Tank Lid
2 Solution Tank 13 Base Vacuum Air Intake
3 Base 14 Power Cords
4 12” Rear Wheels 15 Pressure Gauge *
5 5” Front Casters 16 Pressure Regulator *
6 Vacuum Hose Attachment 17 Waste Tank Drain Gate Valve
7 Switch Plate 18 Dual Circuit Indicator
8 Waste Tank Lid 19 Circuit Breaker *
9
Solution Line Quick
Connect
20 Pump Primp Lever *
10
Auto Fill Quick Connect 21 Pump-Out Hose Connection *
11
Base Access Bracket 22 Cord Wrap Bracket
*Feature availability varies by model
To Next Page
Loading...