Hydropath HydroFLOW K40 Aquaklear User Manual

INSTALLATION
1. Connect the main body of the unit to the pipe with the
two tie wraps (C & D).
2. Loosely assembly the ferrite ring around the pipe using
the thumbscrews and nuts (E).
3. When the ring is assembled, tighten the screws by hand (F).
4. Plug PSU into unit and connect to mains power (G).
ELECTRICITY
As with all electrical equipment, ensure that the equipment
is connected in accordance with current electrical
regulations in your area.

Hydropath HydroFLOW K40 Aquaklear Specifications

General

Brand	Hydropath
Model	HydroFLOW K40 Aquaklear
Category	Water Dispenser
Language	English