Need help?Do you have a question about the HydroQuip BES6000-HC Series and is the answer not in the manual?
Guidance on safe installation practices, including bonding, drainage, and electrical codes.
Details on connecting electrical supply, wiring, circuit breakers, GFCI, and bonding for safe installation.
Step-by-step instructions to test the Ground Fault Circuit Interrupter for safety.
How to set the thermostat to control water temperature and adjust settings.
Description of the heater, its operation, and specifications, including safety switch.
Explanation of the high limit switch's function and reset procedure.
Explanation of the indicator lights on the diagnostic center for real-time system status.
How to use the optional timeclock for controlling heating and filtration cycles.
Instructions for operating the system when it's standalone, including initial setup and purging.
Guidance for operating the system with the Auto Fill option, including valve actuation.
Instructions for operating the system with Auto Fill and Auto Drain, including valve sequencing.
Instructions for operating the system with the Remote Control Auto Fill/Drain option.
Procedure for adjusting the heater pressure switch to ensure proper heat activation.
General| Model | BES6000-HC Series |
|---|---|
| Voltage | 240V |
| Amperage | 25A |
| Power | 6 kW |
| Control Type | Digital |
| Type | Electric Heater |
| Heater Style | Inline |
| Plumbing Connection | 2 inch |
To Next Page
