62 english
4.2 Rinsing of the cooling circulation
Rinse the water cooling circuit after 50 h and after every seawater ride!
Additionally rinse after 10-12h.
Clamp the water hose to the tail pipe.
Attach the flush kit at the engine to the water pipeline.
Rinse and untwist the engine (within 5 sec.) until the water no longer contains dirt.
Finishing Flushing: Stop rinse and stop the engine within 5 sec.
Flush-Kit
The Flush kit enables it after to water cooling circuit drives into seawaters or into
frames regular maintenance to flush.
Mount the connecting piece of the flush kit (flush kit connection and connecting
piece).
Water pipe pressure max. 2 bar!
To Next Page
Loading...