Hydrospace S4 Standup - Page 85

85
Lubrication
Regular lubrication and anti-rust treatment are indispensable for the life and
reliability of your S4 Standup. The following lubrications are to be carried
out according to the "inspection table" and the section "Daily checks
before a ride," Chapter: Operation.
The following spots are to be lubricated with deep-penetrating rust
protection, e.g. WD40
 Lubricate the throttle cable with cable lubricator (ill.1).
 Jet nozzles and water jet reverse pivots (ill. 2).
ill. 1
ill. 2
A
Jetpump downside
A. Fulcrum
A
Jetpump upside
A. Fulcrum
Lubricate the following parts with high-quality
water-resistant boat grease
 Switch ball and socket joint (ill. 3).
 Control joint (ill. 4).
 Throttle end near the lever (ill. 5).
Abb. 3: Jetpump
A. Ball joint
A