EasyManua.ls Logo

Hydrotec HY-MAG Competition - User Manual

Default Icon
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
- 1 -
Operating Instruction
HY-MAG
Competition
Serial number: _______________
HYDROTEC
Hydrotec House
4-5 Manor Courtyard
Hughenden Avenue
High Wycombe
HP13 5RE
Tel. 01494 / 796040 Fax 01494 / 796049
Question and Answer IconNeed help?

Do you have a question about the Hydrotec HY-MAG Competition and is the answer not in the manual?

Summary

General Information

Initiating Phase

Control box initiates automatically after connection to mains power, showing system checks and operating sequences on the LCD display.

Normal Operation Display

LED Light Sequence

Describes the operation phases shown by LED lights during continuous operation, including GREEN and RED phases.

REFIT Phase

Details the REFIT® phase, characterized by magnetic remanence clearing and LED extinguishment, for both GREEN and RED LED states.

Menu System Navigation

Main Program Menu

Explains how to navigate the main menu and select sub-menus using the buttons for various settings like operation mode and language.

Operation Modes

Continuous Operation

HY-MAG operates on a continuous 24 hour/day basis for water treatment and conditioning.

Timer Control

Control box is in standby mode, with switch-on/off times controlled by internal timers, allowing one daily program.

Operation Off

No operation of HY-MAG, intended exclusively for test mode, not for normal water treatment.

Operating Hours

Absolute Value

Total operation time of HY-MAG unit in actual installation, counted since start-up, excluding standby times.

Relative Value

Operating hours counted from a certain period, resettable by the operator, showing hours since last reset.

Date and Time Settings

Date;Time Alteration

Procedure to alter internal timer and date using cursor buttons, marking active fields and confirming settings.

Time Zones Configuration

Switch-on;off Time Programming

Program switch-on and off times for groups of days or individual days, controlled by internal timers.

Language and Service

Menu Language Selection

Select and confirm the menu language (German or English) using the buttons for operation and setting.

Service Menu Access

Service menu is code protected and accessible by authorized personnel; returns to standard mode if left inactive.

Failure Indication

Automatic Failure Recognition

Control box automatically recognizes failures, displaying type on LED scale and LCD. Can signal via potential-free contact.

Failure Types and Causes

Details failure types like Undercurrent, Overload, Short cut, and Control box failure with their respective causes.

Failure Remedial Actions

General Checks and Fuse

Initial checks for operation and mains voltage, including fuse inspection and replacement on the terminal unit.

Specific Failure Remedies

Provides specific remedial actions for Undercurrent, Overload, Short cut, and Control box failures, including contact Hydrotec.

Hydrotec HY-MAG Competition Specifications

General IconGeneral
BrandHydrotec
ModelHY-MAG Competition
CategoryControl Unit
LanguageEnglish