CHARGING PROCEDURE
1) Plug the charger into an appropriate
outlet. The light will be green.
2) Slide the battery pack into the
charger, the light will turn to red to
indicate the charging process has
started.
3) When charging is completed, the
light will turn to green.
After recharging, insert the battery
pack into the battery port. A simple
push and slight pressure will be
sufficient until a click is heard.
Assembling the main handle
1
INSTALLING THE BATTERY PACK
2
ASSEMBLY INSTRUCTIONS
3
HT19-401-003-03
2-in-1 Cordless Grass Trimmer/Edger
40
VOLT
MAX
To Next Page
