Optimum T4100 - Download Instructions Application Manager version 1.3.10/20070123
HYPERCOM Client Services – February 2007
PAGE 1 of 3
T E R M I N A L C O N F I G U R A T I O N
ACTION REQUIRED TERMINAL DISPLAY
1. Force terminal to Maintenance
menu screen by holding down
FUNCTION
button and connecting to
power supply
2. Select “1.Deployment Config”
3. Select “1.Terminal Config”
4. Select “1.Yes” (The terminal gets
an IP address assigned
automatically)
5. Select “1.Enable” if daylight
savings is observed
(Time adjusts automatically)
OR
Select “2.Disable” if daylight
savings is not observed
ACTION REQUIRED TERMINAL DISPLAY
6. Key in current time
Press the hot-key next to AM or PM to
switch selection and press
ENTER
7. Select “1.Yes” to configure download
host
8. Select “1.Edit/View Host”
9. Key in TID (No check digit is needed)
Press
ENTER
to confirm
10. Select connection type
Select “2.IP/Ethernet” for IP download, follow step 11
OR
Select “1.Dial” for dial download, jump to step 18
To Next Page
Need help?
General
