2. Creating Thumbs
Creating thumbnails or "thumbs" of JPEG photos will
help to speed up the browsing of such photos on the
COLORSPACE, To batch create thumbnails of photos,
select <Create Thumbs> under "Function" on the main
menu and select a folder containing photo files. You can
only create thumbnails of JPEG photos.
IV
3. USB Connection
1. Connect COLORSPACE to a USB port on your computer with the
provided USB cable. Do not connect via a frontal USB port or via a USB
hub.
2. Select <USB> under <Functions> on the main menu.
3. Access COLORSPACE as a local disk.
The function enables you to:
=access data on the COLORSPACE hard drive
Note:
=You should connect the device to the AC adapter when transferring
large amounts of data. This is because during data transfer, the device
will consume more power than the USB port is able to provide (i.e.
500mA) and additional power is drawn from the internal battery. If the
AC adapter is not connected, the battery will eventually be exhausted
and the device will shut down automatically. This is not a malfunction.
=The device does not function as a card reader. Hence you cannot
access the memory card via USB.
3 2
To Next Page
Loading...