1. Hard Drive Tools
Viewing hard drive capacity and S.M.A.R.T. information:
S.M.A.R.T. stands for Self-Monitoring, Analysis Reporting
Technology. It detects and records predictable mechanical hard
drive malfunctions, which account for the majority of hard drive
malfunctions. S.M.A.R.T. can issue malfunction warnings to
prevent data loss.
Under <Tools> on the main menu, select <Hard Drive> -> <Info>
to see the hard drive's usage and remaining storage capacity.
PressćOKć to show S.M.A.R.T. information and toggle
between the two Info screens.
Formatting the hard drive:
1. Make sure that you installed the hard drive properly. Refer to
earlier section of "Hard Drive Installation" if necessary.
2. Under <Tools> on the main menu, select <Hard Drive>
[ <Format>.
3. Confirm the hard drive information and select <Format>.
4. Confirm (twice) that you wish to format the hard drive and
select the number of partitions. Partitions are evenly allotted
(e.g. a 120GB hard drive with three partitions will have C, D
and E partitions of approximately 40GB each).
5. Restart device after formatting is completed.
V
3 6
To Next Page
Loading...