Do you have a question about the Hyperkin SCOUT PREMIUM and is the answer not in the manual?
Package type | Box |
---|---|
Package depth | 50.8 mm |
Package width | 177.8 mm |
Package height | 127 mm |
Package weight | 272.155 g |
Receiver included | Yes |
Device type | Gamepad |
Gaming control technology | Digital |
Gaming platforms supported | Android, Nintendo NES Classic |
Gaming control function buttons | D-pad |
Wireless range | 9.144 m |
Device interface | Bluetooth |
Connectivity technology | Wired |
Battery type | Built-in |
Battery life (max) | 6 h |
Product color | Grey, White |
Weight | - g |
---|
Located on the very top of the Scout near the Micro Charge Port.
Located on the face of the Scout near the top.
Located on the front of the Dongle.
Located on the front of the Dongle.
Located on the very top of the Scout.
Connect the dongle, press the controller sync button, and observe LED indicators for successful pairing.
Press sync button to turn off; hold for 2 seconds to turn on.
Press any button or the D-Pad to wake the Scout.
Connect the micro charge cable to a USB power source; solid red light indicates charging.
A slowly flashing red light on the controller LED indicator means the Scout is low on battery.
Operates up to 30 feet; enters sleep mode after 5 minutes of inactivity.
Unsynced controller flashes blue for 20 seconds then sleeps.
Pressing the dongle sync button makes its LED indicator flash blue.
Controller appears as 'Input device' during pairing, then as 'Hyperkin Pad'.
Device complies with Part 15 of FCC Rules; may cause interference if not used properly.
Complies with Low Voltage, EMC, and RoHS Directives; carries CE marking.