MICROEDGE AND OMNICOM MOTHERBOARD REPLACEMENT
Field Service Bulletin 3Field Service Bulletin 3
If the DC power cable connector on the old mother board has 20 pins, as shown below, you must use the DC power
(CABL-0277) and PS_ON (CABL-0281 or CABL-0279) cables that are supplied in this kit. Refer to MicroEdge
installation or Omnicom installation for details.
DC power cable (20 pins)
PS_ON cable
CPU fan cable
12 V Power cable
Motherboard with 20-pin DC power cable connector
To Next Page
Loading...
