Need help?Do you have a question about the HyperX ChargePlay Base and is the answer not in the manual?
General| Charging Ports | 2 |
|---|---|
| Power Source | AC Adapter |
| Charging Indicator | Yes |
| LED Indicators | Yes |
| Number of Devices Supported | 2 |
| Compatibility | Qi-enabled devices |
| Device Type | Wireless Charger |
| Input | 5V/2A |
| Wireless Output | 5W |
| Cable Length | 3.3 ft |
The primary surfaces for wireless charging of devices.
Features designed to keep devices stable on the charging base.
LEDs that provide visual feedback on the charging status.
The input port for connecting the charging cable.
The power adapter that connects to a wall outlet.
The cable used to connect the adapter to the charging base.
Connect the USB Type-C cable to the charging base.
Plug the AC adapter into a wall outlet.
Position devices onto the charging pads.
Details on charging speeds and device limits for the adapter and cable.
Explanation of LED states: ON (charging), OFF (not charging), BLINKING (error).
Contact information for assistance with setup or configuration problems.
To Next Page
