ENGLISH
Overview
A - Charging contacts
B - Touch sensor
C - Microphones
D - Charging case
Powering on and o the Earbuds
To power on the earbuds, open the charging case. The charging case status LED will show the battery level of the
earbuds.
To power o the earbuds, return them to the charging case and close the lid. The case LED will turn o.
Pairing the Earbuds
1. With the earbuds inserted, open the lid of the charging case.
2. Press and hold the charging case button for 3 seconds. The charging case status LED will begin ashing blue.
3. On your Bluetooth® enabled device, search for and connect to HyperX Cloud MIX Buds. Once connected, the
charging case status LED will turn solid blue and fade o, returning to the battery level indication.
Connecting the Low Latency USB Adapter
1. Connect the low latency USB adapter to your mobile device, PC, or video game console. The USB adapter status LED
will begin ashing white. When not being used with a mobile device, it is recommended that the included extension
adapter and USB-C to USB-A cables be used.
2. When the earbuds are powered on, they will automatically connect to the USB adapter, and the USB adapter status
LED will breathe white.
Using the Touch Controls
The following media controls are available when using Bluetooth® or the low latency USB adapter:
The following phone controls are available when using Bluetooth®:
E - Charging case status LED
F - USB-C port
G - Charging case button
H - Low latency USB adapter
I - USB adapter status LED
J - USB adapter button
K - Extension adapter
L - Silicone case
M - Ear tips (large, small)
N - USB-C to USB-A cable
CHARGING CASE STATUS LED
NIVEAU DE BATTERIE DES ÉCOUTEURS
Green 51 % - 100 %
Yellow 16 % - 50 %
Red < 15 %
Note: Touch control functionality can vary between devices and apps
Muting the Microphones When Using the Low Latency USB Adapter
Press the USB adapter button to mute/unmute the low latency USB adapter’s microphone audio. The USB adapter
status LED will breathe red when the microphone audio is muted.
Checking the Charging Case Battery Level
Press the charging case button to check the charging case’s battery level, indicated by a blink and hold of the case’s
status LED.
Charging
It is recommended that the charging case and earbuds be fully charged before rst use.
When charging, the charging case status LED will indicate the battery level of the earbuds. If neither earbud is in the
charging case, the case status LED will indicate the battery level of the charging case.
Bluetooth A2DP mode: Up to 33 hours / Ultra-low latency mode: Up to 21 hours
*Tested at 50% headphone volume, continuous playback. Using A2DP mode earbuds have up to 10 hours of battery
life and up to an additional 23 hours using the charging case. Using ultra-low latency mode earbuds have up to 6
hours of battery life and up to an additional 15 hours using the charging case. Actual battery life will vary with use and
maximum capacity will naturally decrease with time and usage.
HyperX NGENUITY Mobile
To customize sound, controls, and other settings, please download the HyperX NGENUITY Mobile application from iOS
App Store or Android Google Play.
Questions or Setup Issues?
Contact the HyperX support team or see the user manual at: hyperxgaming.com/support/headsets
WARNING: Permanent hearing damage can occur if a headset is used at high volumes for extended periods of time.
1 PRESS 2 PRESSES
Play/Pause Skip Track
3 PRESSES LONG PRESS
Previous Track Mute/Unmute Microphones
STATUS 1 PRESS
Receiving Call Answer Call
2 PRESSES
In Call X
Reject Call
End Call
3 PRESSES
X
X
LONG PRESS
X
Mute/Unmute Microphones
To Next Page
Loading...
Need help?
General
