To Next PageTo Next Page
Need help?Do you have a question about the HyperX QuadCast and is the answer not in the manual?
General| Headphone out | Yes |
|---|---|
| Device interface | USB |
| Connectivity technology | Wired |
| Cable length | 3 m |
| Product color | Black, Red |
| Country of origin | China |
| Operating voltage | 5 V |
| Power consumption | 125 mA |
| Type | Table microphone |
| Bit rate | 16 bit |
| Sample rate | 48 kHz |
| Microphone frequency | 20 - 20000 Hz |
| Microphone sensitivity | -36 dB |
| Stand weight | 364 g |
| RMS rated power | 0.007 W |
| Output impedance | 32 Ω |
| Total Harmonic Distortion (THD) | 0.05 % |
| Line-out Signal-to-Noise Ratio (SNR) | 90 dB |
| Package depth | 174 mm |
| Package width | 150 mm |
| Package height | 280 mm |
| Package weight | 1190 g |
| Export Control Classification Number (ECCN) | - |
| Commodity Classification Automated Tracking System (CCATS) | 85181095 |
Weight and Dimensions| Microphone weight | 254 g |
|---|
Explains how to choose between Stereo, Omnidirectional, Cardioid, and Bidirectional polar patterns for optimal sound capture.
Details how to use the gain control knob to adjust the microphone's input sensitivity.
Describes how to mute or unmute the microphone using the tap-to-mute sensor and LED indicator.
Step-by-step guide for configuring the HyperX QuadCast microphone on Windows operating systems.
Instructions for setting up the HyperX QuadCast microphone correctly on macOS devices.
Guide for adjusting microphone monitoring levels via PC sound settings.
Instructions on how to enable or disable microphone monitoring in macOS Audio MIDI Setup.
