Hyster H90FT - Page 14

1. WHEEL HUB COUPLER
2. CAPSCREWS
3. REMOVAL HOLES
4. WHEEL HUB
5. BEARING CAP
6. O-RING
Figure 9. Wheel Hub Coupler for Lift Truck Models
S4.0, 4.5, 5.5FT, S5.5FTS (S80, 100, 120FT; S80,
100FTBCS; S120FTS; S120FTPRS) (H004, J004)
Figure 10. Wheel Hub Coupler for Lift Truck
Models H4.0FT5/FT6; H4.5FTS5, H4.5FT6,
H5.0-5.5FT (H80, 90, 100, 110, 120FT) (R005, S005,
U005)
Legend for Figure 10
1. WHEEL HUB COUPLER
2. CAPSCREWS
3. REMOVAL HOLES
4. WHEEL HUB
5. BEARING CAP
6. O-RING
NOTE: RETAINING PLATE FOR LIFT TRUCK MOD-
ELS S4.0, 4.5, 5.5FT, S5.5FTS (S80, 100, 120FT;
S80, 100FTBCS; S120FTS; S120FTPRS) (H004,
J004) SHOWN. H4.0FT5/FT6; H4.5FTS5, H4.5FT6,
H5.0-5.5FT (H80, 90, 100, 110, 120FT) (R005, S005,
U005) IS SIMILAR.
1. RETAINING PLATE
2. CAPSCREW
3. SNAP RING
Figure 11. Retaining Plate
Reduction Gear Assembly 1400 SRM 1582
8