Owner’s Manual
Error! Use the Home tab to apply 标题 1,P
art,Document Header,Part1,Document Heade
r1,Part2,Document Header2,Part11,Document
Header11,Part12,Document Header12,Part2
1,Document Header21,Part111,Document He
ader111,Part3,Document Header3,Part13,Doc
ument Header13,Part22
19
7. Basic Operations
7.1 Turning On/Off
To turn on the terminal, long press the Power On-Off/End key. Then the LED indicator will glow red and
the power-up greeting appears on the LCD. In TMO, after being turned on, the terminal will logon to the
network. In DMO, the terminal will be ready for use after being turned on.
To turn off the terminal, long press the Power On-Off/End key until the power-off screen appears.
7.2 Switching Operation Mode
This terminal can operate in either TMO or DMO. To switch the operation mode, press the Options/P3
key in the home screen to enter the “Options” menu, and then select “TMO” or “DMO”.
7.3 Adjusting the Call Volume
You may adjust the volume through the Volume Control/Group Selector knob. In the home screen,
rotate the knob clockwise to increase the output volume, or counter-clockwise to decrease the volume.
Then press OK to save. If you’ve adjusted the volume during a call, press Back or OK, or just leave it
alone for 3s after your adjustment, the terminal will save the setting and return to the former screen.
7.4 Inputting through Keypad
You can use the numeric keypad to enter user alias and number, edit messages, etc. The terminal
supports these input methods: English and Number. To switch the input method, press the
key
on the numeric keypad. In English/Number input method, you can enter special characters and common
punctuations by pressing
, enter “*” by pressing and enter a space by long pressing this key.
As for other language input methods (depending on your customization), operate accordingly.
7.5 Locking/Unlocking the Keypad
To enable the keypad lock, enter the Function menu by pressing the Function/P1 key or the OK key in
To Next Page
Loading...
