Hytera PD782i - Message Services

9
Message Services
This feature allows you to edit and send a new
message, to directly send a quick text message and
to forward the messages in the Inbox, Outbox and
Drafts.
Message
1. Go to “Menu -> Message -> New Message” to enter
the relevant screen.
2. Type the text and then press the OK key. Save it to
Drafts, or send it to a private call contact or a group
call contact.
3. Select the contact or input the contact number
manually.
4. Press the OK key to send the message. When the
message is sent successfully, the radio will display
the prompt “Send Success!”.
You can send the Quick Text or status messages, and
forward the message saved in the Inbox, Outbox or
Drafts. See the detailed introductions of the submenus
of Message respectively.
Quick Text
Quick Text are frequently used messages preset
by
your dealer. You can choose to edit and send any
entry.
Status Message
Status message is a quick message. Only code
rather than the message text is transmitted, to ensure
privacy of the communications. Status messages are
configured by your dealer. You can check and send
the preset status messages, but cannot modify or
delete them.
Inbox
The radio saves the received messages into the Inbox
and marks every messag
e with a corresponding icon
to indicate its status.
● : Read message
● : Unread message
● : Read status message
● : Unread status message
When it is full, the radio will display the icon
,
and the earliest message will be overwritten by the
latest one automatically.
Outbox
The radio saves the sent messages into the Outbox
and marks every message with a corresponding icon
to indicate its status.
● : The message is sent successfully
● : The message is not sent successfully. In this
case, you can resend it.
● : Status message is sent successfully.
● : Status message is not sent successfully. In
this case, you can resend it.
When the Outbox is full, the earliest message will be
overwritten by the latest one automatically.
Drafts
The radio save the edited messages into the Drafts.
When the Drafts is full, the earliest message will be
overwritten by the latest one automatically. After
the message in the Drafts is sent successfully, it will
be removed from the Drafts and be saved into the
Outbox. If not sent successfully, the message will be
saved into the Drafts and the Outbox.