29
temporarily and shows “Radio Disabled”.
Note: the number of times that you are allowed to input wrong PIN or PUK code is
programmable through the programming software. When the terminal is disabled, contact
your dealer to activate it. The default PIN code is 1234, and the default PUK code is
12345678.
¾ Change PIN code
This option allows you to change the PIN code. Before changing it, you need to enter the
old PIN code correctly. Then you will be asked to input your new PIN code twice. Please
make sure the codes you entered are identical; otherwise, you have to reset it again.
■Man Down
When this feature is enabled, the terminal will send an emergency call to the predefined
ID automatically once it falls over or tilts by 45°. At the same time, it would sound sharp
alarm tone. With this feature, you can enjoy enhanced personal protection.
■Reset All
This option allows you to restore all settings to default value. To perform this operation,
you need to input the right PIN code.
Others
To Next Page
Loading...
