32
¾ Scan List
You can receive calls only from groups that are included in the scan list and have been
attached successfully (indicated by the icon
). But you can always receive from the
default group and the emergency group, regardless of the foregoing condition.
After entering the scan list, you can perform the following operations:
Scan On: to enable Scan feature and to attach all talk groups in the scan list;
Scan Off: to disable Scan feature and to detach all talk groups except background group,
default group and emergency group.
Scan: to attach all talk groups in the scan list.
To add groups to the Scan List, enter a static folder, and select “As ScanList” from
Options.
Note: Scan List is available for TMO mode only.
¾ Static Folder
After accessing any of the folders, you can perform the following operations:
Add: to include a talk group into the current folder;
Delete: to remove a talk group from the current folder;
Delete All: to remove all talk groups from the current folder.
As SltList: to add all talk groups in the current folder to Selected List;
As Scan List: to add all talk groups in the current folder to Scan List.
To Next Page
Loading...
