36
receiving party varies.
Abnormal disconnection during
a call
1. Check the signal strength in TMO mode.
2. Check whether you are in a place where the signals
can be shielded (such as basement and tunnel) and
whether the other party is out of coverage.
3. Check the battery strength.
Note: If the above solutions can not fix your problems, or you may have some other
queries, please contact us or your local dealer for more technical support.
Care and Cleaning
To guarantee optimal performance as well as a long service life of your terminal, please
follow the tips below.
Terminal Care
Keep the terminal far away from substances that can corrode the electronic circuit;
Do not hold the terminal by its antenna or earpiece cable directly;
Attach the accessory jack cover when accessory is not connected.
Terminal Cleaning
Clean up the dust and fine particles on the terminal parts with a clean and dry lint-free
cloth or a brush regularly.
Use a non-woven cloth with neutral cleanser to clean the keys, control knobs, LCD
and jacks after long-time use. Do not use chemical preparations such as stain
removers, alcohol, sprays or oil preparations. Make sure the terminal is completely
dry before use.
Caution: Power off the terminal and remove the battery before cleaning.
To Next Page
Loading...
