14
Programmable Auxiliary Functions
Auxiliary functions to the programmable key (with long/short press) can be
programmed via programming cable and CPS software.
● None
● Compandor
● Monitor
● Monitor Momentary
● Scan
● Scrambler
● Squelch Off
● Squelch Off Momentary
● VOX
● Battery Strength Indicator
● Channel Lock
Advanced Operations
The following functions can be programmed via programming cable and CPS
software. Contact your retailer for additional information.
CTCSS/CDCSS
Set up talkgroups with unique CDCSS/CTCSS to prevent unwanted
conversations on the same frequency.
If CTCSS/CDCSS is set on the current channel, CTCSS/CDCSS match is
required for the radio to unmute to an incoming signal. If CTCSS/CCSS is not
set, the radio can receive calls from all users operating on the same frequency.
This feature does not mean that your conversation will not be heard by others.
Radios that set with the same CTCSS/CDCSS, or no CTCSS/CDCSS, can
receive from you.
Battery Save
This feature, when no signal is received or no operation is made, can lower
battery consumption.
Once the radio detects no activity on the channel and no operation performed
(no key press and no knob selection) during radio standby time, it shall
automatically enter sleep mode ten seconds later.
To Next Page
Loading...
