Hytera TETRA PT580H - Keypad Lock; Display Saver; Display; Display Invert

13
You can toggle the time format between 24H and 12H using Left
or Right key. When all settings are done, press OK to make them
take effect.
■ Keypad Lock
This option allows you to enable or disable the Auto Keypad Lock
feature. If it is enabled, the keypad will be locked automatically
after the programmed time (10 seconds by default) elapses.
■ Display Saver
This option allows you to enable or disable the screensaver. If
enabled, it will be activated automatically after the programmed
time (15 seconds by default) elapses.
■ Display
Display Invert
This option allows you to invert the displayed information by 180°
so that you can access it easily.
Note:whenthedisplayisinverted,thefunction
ofOKkeyandBackkeyexchanges.
Brightness
You can use Left or Right key to adjust the brightness level.
Menu Navigation
Keypad Light
This option allows you to enable or disable keypad light. The
lighting duration is programmable with the programming software.
■ Security
PIN Code On/ Off
To set PIN code On or Off, you will be required to input the
PIN code. The terminal will be locked when wrong PIN code is
entered up to the predefined times. To unlock it, you need to
enter the right PUK code. Then the terminal will bring you to an
interface, where you can reset your PIN code or press Back key
to restore it to default value. However, when a wrong PUK code is
entered up to the predened times, the terminal will be disabled
temporarily, showing “Radio Disabled”, and then get powered off
automatically.
Note:Thenumberoftimesthatyouareallowed
toinputwrong PIN or PUK codeispro-
grammable through the programming
software.When theterminal is disabled,
contact your dealer to activate it. The
defaultPINcodeis1234,andthedefault
PUKcodeis12345678.
PT580H Hytera 英文说明书 00(RoHS).ind13 13 2010-12-8 17:26:52