Why does my Hyundai power products HYBC5200X start but not run at full power?
Your Hyundai power products Brush Cutter might not be running at full power due to the following reasons: the choke lever may be incorrectly adjusted, so move it to the upper position. Alternatively, the air filter could be contaminated, requiring cleaning.
What to do if my Hyundai power products HYBC5200X Brush Cutter engine does not run smoothly?
If your Hyundai power products Brush Cutter engine isn't running smoothly, the spark plug cap may be the cause. Try cleaning the spark plug and adjusting the spark plug gap, or replace the spark plug.
Why are there soot deposits or wetness on the spark plug of my Hyundai power products HYBC5200X Brush Cutter?
Soot deposits or wetness on the spark plug of your Hyundai power products Brush Cutter may be caused by incorrect carburettor adjustment. Contact your service dealer.
General| Displacement | 52cc |
|---|---|
| Cooling | Air-cooled |
| Engine Type | 2-stroke, air-cooled |
| Fuel Tank Capacity | 1.2 liters |
| Cutting Width | 255 mm |
| Shaft Type | Straight |
To Next Page
