What to do if the Hyundai power products Power Tool engine starts but does not run at full power?
If the engine starts but doesn't run at full power, it could be due to: 1. Incorrect adjustment of the choke lever. Ensure the choke lever is properly set. 2. A contaminated air filter. Clean the air filter.
Why is my Hyundai power products HYMT5200X saw chain running slowly?
A saw chain that's running slowly may be dry, overheating, or sagging. To resolve this, top up the oil, regrind the chain, replace it, or tighten the saw chain as needed.
What to do if Hyundai power products HYMT5200X Power Tool engine does not run smoothly?
If the engine isn't running smoothly, the issue might be with an incorrect spark plug cap. Try cleaning the spark plug, adjusting the spark plug gap, or replacing the spark plug.
What to do if motor is running, saw chain does not move on Hyundai power products Power Tool?
If the motor is running but the saw chain isn't moving, it's possible that the pole pruner attachment isn't properly connected to the engine unit. Check the assembly to ensure it's correctly attached.
What to do if motor is running, blades do not move on Hyundai power products HYMT5200X Power Tool?
If the motor is running but the blades aren't moving, the hedge trimmer attachment might not be properly connected to the engine unit. Check the assembly.
Why are there soot deposits or wetness on the spark plug of my Hyundai power products HYMT5200X?
The presence of soot deposits or wetness on the spark plug indicates an incorrect carburetor adjustment. Adjust the carburetor. Contact aftersales.
General| Engine Displacement | 52cc |
|---|---|
| Starting System | Recoil Start |
| Noise Level | 113 dB(A) |
| Engine Type | 2-stroke |
| Fuel Tank Capacity | 1.2 liters |
Guidelines for personal safety, machine checks, work area, and protective gear.
Safety for attachments, engine, hazards, fuel, electrical, and operational practices.
Safety during maintenance, troubleshooting, and understanding technical data related to hazards.
Detailed list and description of all parts and accessories included with the multi-tool.
Guidelines for safely unpacking, checking, and assembling the machine.
Connecting attachments, extension boom, operating trimmers/saws, and managing trimmer line.
Procedures for starting/stopping engine, kickback prevention, and trimmer line management.
Safety rules, cleaning, storage, lubrication, and checks for machine upkeep.
Maintenance for components, schedules, and solutions for common issues.
Technical details, noise, vibration, disposal guidelines, and EC conformity statement.
Information on product features, range, owner details, and service records.
Details on YouTube channel, warranty, manuals, spare parts, and customer contact.
To Next Page