Need help?Do you have a question about the Hyundai HYMT5200 and is the answer not in the manual?
General| Model Number | HYMT5200 |
|---|---|
| Engine Capacity – cc | 52 |
| Fuel Tank Capacity – ml | 800 |
| Trimmer Head Bevel Gear Grease Type/ Qty-ml | High temperature gear Grease / 25 |
| Hedge Trimmer Grease Grease Type / Qty-ml | Lithium Based / 20 |
| Max Speed – rpm | 7500 |
| Power – kw | 1.56 |
| Cutting Width – mm | 255mm for Brush Cutter Blade 400 – 450mm for Grass Trimmer Head |
| Chainsaw Bar Length – mm | 295 |
| Extension Shaft Length – mm | 800 |
| Chainsaw Assembled Length – mm | 3270 (with extension pole) |
| Hedge Trimmer Assembled Length – mm | 3440 (with extension pole) |
| Brush Cutter / Trimmer Fully Assembled Length – mm | 1860 |
| Weight – Kg | 9Kg (dependent on attachment) |
| Engine | Hyundai IC52-2R 2 Stroke |
| Fuel Type | 40:1 2 Stroke Unleaded Petrol / 15w40 Semi-Synthetic Engine Oil |
| Noise Level dB(A) | 115 |
| Start Method | Easy Recoil |
| Drive Type | Splined Split Shaft |
Weight and Dimensions| Nylon Line Length / Diameter - mm | 3m / 2.5mm |
|---|---|
| Hedge Trimmer Length - mm | 430 |
General safety instructions for safe operation and user responsibility.
Explanation of warning symbols and mandatory Personal Protective Equipment (PPE).
Hazards of carbon monoxide from engine exhaust and necessary safety precautions.
Safety guidelines for handling flammable fuels, including storage and proper disposal.
Procedures and safety precautions for fueling and defueling the machine.
Safety measures related to electrical components and potential electrical hazards.
Safety advice on managing trailing cables and avoiding electrical hazards in wet conditions.
Risks associated with batteries, electrolyte contact, and safe handling procedures.
Health risks from prolonged vibration exposure, including white finger and carpal tunnel syndrome.
Risks of hearing damage from noise and the importance of wearing hearing protection.
Prohibition of operation by children or individuals unable to understand instructions.
Reinforces the requirement for appropriate Personal Protective Equipment during operation and repair.
General safety rules for operating the machine, covering conditions and user experience.
Visual guide to all included parts and their corresponding numbers for identification.
Step-by-step instructions and parts list for assembling the handle unit.
Detailed steps for attaching and tightening the upper and lower handles.
Parts and drive head assembly for trimmer and brush cutter attachments.
Attaching trimmer guard, aligning drive shaft, and installing grass trimmer head.
Instructions for replacing trimmer line and winding it onto the trimmer head.
Steps for attaching trimmer guard and brush cutter blades to the drive shaft.
Note that hedge trimmer requires no assembly; adjust cutting angle.
Parts and initial steps for chainsaw assembly, including chain installation.
Instructions on looping chain, adjusting tension, and tightening sprocket cover.
Filling chain oil, loosening hand wheel, and fitting chainsaw to main shaft.
Instructions for putting on, adjusting, and connecting the harness to the machine.
Testing the quick release mechanism and reattaching the harness.
Instructions on fuel mixture ratio and safe fuel tank filling.
Steps for priming carburetor and setting choke for cold/warm starts.
Turning on ignition, pulling recoil handle, and adjusting choke for warm start.
Procedures for idling engine before stopping and general shutdown process.
How to engage drive, operate throttle lock, and adjust throttle resistance.
Best practices for grass trimming, including line advancement and cutting angle.
Techniques for brush cutter use, avoiding kickback, and cutting heavy growth.
Safety and operational guidelines for using the hedge trimmer attachment.
Safe chainsaw operation, lubrication, cutting techniques, and kickback avoidance.
Overall safety precautions for chainsaw operation, including bystander safety and PPE.
Table of maintenance tasks for components at various usage intervals.
Instructions for cleaning and maintaining the air filter for engine performance.
Procedures for inspecting, cleaning, gapping, and replacing the spark plug.
Guide to maintaining guide bar, chain, and nose sprocket for chainsaw attachment.
Steps for sharpening chainsaw chain cutters and depth gauges.
Hedge trimmer blade maintenance and general machine cleaning instructions.
Guidelines for preparing and storing the machine to prevent damage and ensure starting.
Detailed technical data including model, engine, dimensions, and weight.
A guide to identifying and resolving common issues with the machine.
Declaration confirming product compliance with relevant CE directives and standards.
Proper disposal of machine, parts, and packaging per environmental regulations.
Details for customer support: postal address, fax, and email.
How to register product for warranty and find full terms and conditions.
Statement on manual updates, error reporting, and modification rights.
To Next Page
