I-CAN Thunder AX 3600 User Manual

15
TELECOMANDO
Use a Web Browser to Access
Router Configuration
02
The router’s web interface allows viewing or changing router set-
tings, and displaying the information about its current status.
To access the router’s web user interface:
1. Connect your device to the router via LAN cable or Wi-Fi
(refer to product Quick Installation Guide).
2. Ensure that the router is switched on.
3. Open a web browser on a device connected to the router.
4. Enter the router’s IP address (default: http://192.168.1.1) or
router name (i-can.thunder) in the browser address field (see
Figure 10).
5. The Login page will show up (see Figure 11).
6. Enter the router login name created during Configuration
Wizard Step 2 (e.g., “admin”).
7. Enter the password for the specified login name created
during Configuration Wizard Step 2.
8. Optionally change the display language using the relevant
dropdown list.
9. Click the Login button.
Figure 10. Address Field
 NOTE:
The password is not
shown in clear even
during typing, unless
the “Show password”
checkbox is ticked. This
also applies to all other
places where a password
field is present.
Figure 11. Login Page

I-CAN Thunder AX 3600 Specifications

General

Brand	I-CAN
Model	Thunder AX 3600
Category	Network Router
Language	English