●
For enhanced security, change the password on a regular basis.
●
Do not reuse passwords on other recorders or devices.
●
If you forget the administrator name and the password, the recorder must
be initialized (repair).
●
When "9Screen", "16Screen" or any of wide view screen is selected, the
default screen on the web browser of the PC will be set to the live image of
camera 1.
[Level]
Display the operation level of a user.
Operable functions can be set on the [Basic] tab
☞
Configure the basic settings relating to user management [Basic]
Manager/ Operator/ Viewer
* Administrator and manager both have the same level, but the administrator has the
higher priority.
Default: Operator
[Default screen]
Select a startup screen to be displayed after login.
The parameters differ depending on the model. Refer to the following section for details.
☞
Advanced setup
Default: 4Screen(1)
[Camera partitioning]
Select which control range each camera should follow.
Common setting: The camera follows "User level settings" of "User management>Basic".
Individual setting: The camera follows camera partitioning settings set for each user.
Click the [Setup >] button to set the camera partitioning individually.
Set the camera partitioning individually.
Set availability of image display and camera operation in each camera for the assigned
user.
[Setup via recorder's main monitor]
130
To Next Page
Loading...
Need help?
General
